PIR motion detector Radal CSA-POD - cable
Wired PIR motion detector; Cleaner Mode function; SD memory card slot
| Code | CSA-POD |
| Availability: | In stock at the supplier |
| Producer: | CZ - S |
| Category: | Tobacco smoke and flame detectors |
Where is the detector suitable?
The CSA-POD detector is suitable for less controlled areas such as public toilets, cubicles, changing rooms, discreet areas, areas reserved for employees or public buildings where violations of the prohibition on handling fire or smoking tobacco products may be more frequent.
What can the detector do?
When motion is detected, it can trigger preset voice messages in any language from a file loaded on the SD memory card. It can thus prevent, for example, the risk of slipping on a wet floor, tripping over an obstacle or falling. This function will be appreciated by cleaning services, which can preseta voice message to warn of wet or slippery floors when motion is detected.TheSmartWave© voice message playback software allows you to select from 100 voice messages, set the time interval, volume and number of replays. Sensor sensitivity can be adjusted from up to five sensitivity modes.
How is the detector powered?
It is powered by an external CSA-006 power module or by 4 AA alkaline batteries. A Fault - Battery is Low" voice message warns of low power and imminent battery discharge.
Can the detector be connected to another device?
The device can be installed stand-alone or can be wired to other devices such as smoke and flame detectors, PIR motion detectors, optical voice detectors or control panels.
If you would like to order a system consisting of multiple devices, please contact us by phone or email.
Where to install the detector and how to protect it from vandalism?
It can be installed on the ceiling or wall.
Because the CAS-POD is suitable for locations where violations are more common, we recommend securing the detector with the CSA-AVC3 steel anti-vandal cover. It will prevent mechanical damage or theft of the detector.
Accessories:
For more convenient operation of a single detector or a whole system consisting of several RADAL Cig-Arrete detectors, it is possible to use the wireless remote control CSA-IR2 (not included).
*certification: CE, EQC
Advantages:
Unique SpeechPOD PIR motion detection technology
SmartWave© software for voice message playback
Up to 100 voice messages can be programmed in any language
Ability to set the time interval between messages so that voice messages are played at the right time
Powered by the CSA-006 external power module or AA alkaline batteries or by the CSA-SMPSU AC adapter
Acoustic alert for end of battery life
Can be controlled with the CSA-IR2 remote control (not included)
| Acoustic signal | prostřednictvím přednastavených hlasových zprávy |
| Certification | CE, EQC |
| Receiver sensitivity | Vysoká, středně vysoká, normální, středně nízká, nízká nebo vypnuto |
| Weight | 0.6 kg |
| Material | GRP plast vyztužená vlákna |
| Power | DC, 4 ks alkalické baterie 1,5 V typu AA (baterie nejsou součástí balení), pomocí AC adaptéru CSA-SMPSU, pomocí externího napájecího modulu CSA-006 nebo externího napájecího boxu CSA-EBB |
| Working temperature | -10°C - 50°C |
| Connecting detectors | Wired 8 - 28 V, Wired 6 V |
| Current draw | <250 mA |
| Operating humidity | 0 - 90% RH nekondenzující |
| Product dimension | 197 x 127 x 28 mm mm |
| End-of-life signalling | hlasová zpráva |
| Static current | <0,5 mA |
| Retrieved from | Kabelový |
| Mounting method | Na strop nebo stěnu (šrouby nejsou součástí balení) |
Settings