Cleaning mats EuSORB DBMF 5040 - reinforced, perforated 25pcs
dimensions: 25 x 40 cm; sorption capacity 18 l
| Code | DBMF 5040 |
| Availability: | 4 days |
| Producer: | CZ- HE - D |
| Category: | Mats |
Description
Polypropylene was used for the production of the sorption mat, which is characterized by chemical and mechanical resistance. The mat belongs to the PREMIUM product line. These textile sorbents are an effective and simple means of capturing spillages in a smaller space, e.g. on a workbench or storage area. They are available in a 50 × 40 cm size.
Textile sorbent thickness
A thick sorbent is a fabric with a higher surface weight and thickness. As a result, it can absorb large quantities of leaked liquids. It is best used in plants with a risk of large or continuous spills of hazardous substances.
Textile sorbent design
A thick sorbent is a fabric with a higher surface weight and thickness. This enables it to absorb large quantities of leaked liquids. It is best used in operations with a risk of large or continuous spills of hazardous substances.
Use of textile sorbent
Textile universal sorbents are designed for the sorption of all non-aggressive liquids. They quickly and safely absorb emulsions, oils, fats, petroleum substances, solvents, water, aqueous solutions or weak chemical solutions. They are used in warehousing, manufacturing or repair facilities to prevent the release of hazardous substances or to deal with emergency situations in the event of a sudden release of these liquids.
The use of these sorbents will provide you with:
Perforation
Perforation allows you to tear off the necessary piece of fabric and better use the sorbent surface area. With this DBMF 5040 sorbent, the transverse perforation allows it to adapt to the needs of a specific workplace, for example to cover rugged surfaces.
Packaging
The sorbents are supplied in a small collection box that can be placed on the workbench. This way you always have the mats at hand. The handy box also protects the sorbents so that they do not deteriorate before use (with a flat, long-term load, the sorption capacity can be reduced by loss of free volume).
Please note
These sorbents cannot be used for extracting oil from the water surface as they preferentially absorb water and aqueous solutions and therefore sink to the bottom.
Sorbent ranges
PREMIUM series textile sorbents are made of special microfibre non-woven polypropylene fabric. Their surface is coated with a thin protective layer that protects the sorbent against abrasion and fibre release. The fabric is also reinforced by ultrasonic bonding, thus greatly increasing its strength. This allows workers to walk over the sorbents. Sorbents from this range are suitable for use in areas where higher mechanical resistance and absolutely minimal fibre release from the surface is required.
Disposal of used sorbents
Disposal of used sorbents is governed by the properties of the absorbed liquids, by internal guidelines for handling chemicals and also by law - important laws are No. 185/2001 Coll. on waste or No. 350/2011 Coll. on chemicals and mixtures. We recommend that hazardous waste is handed over to a specialist company for the disposal of hazardous substances.
| Type of sorption | univerzální |
| Material | Polypropylen |
| Number of pieces in the package | 25 ks |
| Dimensions | 25 x 40 cm |
| Sorption capacity | 18 l |
Settings