CO, flammable and explosive gas detector SAFE 808COM with alarm - combined
Combined flammable and explosive gas detector; battery backup; digital display; last alarm memory; voice warning function in Czech language
| Code | SAFE808COM |
| Availability: | In stock at the supplier |
| Producer: | CZ - S |
| Category: | Combined detectors |
| EAN: | 0703123016315 |
Why get a detector?
Combination detector, a measuring device with voice warning designed to indicate leaks of carbon monoxide and all commonly occurring explosive gases in homes (natural gas, methane, propane, butane) and residential areas without significant hazard. The device is suitable for the detection of gas from all domestic gas appliances, gas boilers and indicates leakage of combustible gas used for heating, cooking or warming.
What can the detector do?
It is equipped with two independent sensors that do not require further calibration, a TEST button to trigger a function that allows the operability of internal circuits to be verified by an automatic efficiency monitoring system. The device has stable measurements, long life, compact size and is highly sensitive. It is controlled by a microprocessor and signals CO and gas leaks visually and audibly via an 85 dB buzzer. If danger is detected, the device will trigger an audible buzzer alarm accompanied by flashing of the red "FLASH" LED and a voice alert "Please beware, carbon monoxide leak!" or "Attention, gas leak!". With this warning message, the detector display simultaneously shows the current measured value.
How is the detector powered?
The device is powered from 230V/AC mains with a 9V NiMH battery backup in case of mains power failure (battery not included).
Where to install the detector?
Carbon monoxide, combustible and explosive gas combination detectors are installed in rooms with potential CO or gas leaks such as bathrooms, gas boiler rooms, kitchens, rooms with vacuum cleaners, karma, instantaneous heaters, thermometers etc. To correctly position the detector we must first identify the gas, whether we are detecting a light gas rising up to the ceiling or a heavy gas falling to the floor. Once identified, we can choose a suitable location for the device. Always install on a wall, depending on the type of gas detected, below the ceiling (approx. 15-30 cm) or above the floor (approx. 15-30 cm) and at a distance of at least 1.2 m from the fuel-burning appliance to minimize false alarms that may occur during a short gas leak, for example when a gas boiler or stove is ignited, and at a distance of approx. 60 cm from the corners, i.e. the point where two walls converge.
*Certified to CE, EN 50194-1:2009 and EN50291-1:2010
Advantages:
Unique dual combination of carbon monoxide and combustible gas detection devices
Voice warning - human voice informs of detected danger
Advanced catalytic combustion and electrochemical sensor technology in one device
Display of current CO and gas concentration on LCD display
Powered by AC 90V-240V mains
Backup power supply with 9V NiMH rechargeable battery in case of power failure
Intelligent detection control via microprocessor
Information and warning LED indication
Test function, verifying correct operation of the device
Self-checking detection system with automatic sensor failure indication
Backlit LCD display for displaying measured values
Loud 85dB alarm signaling
Wall mounted installation
Low battery and sensor failure alarm
Low cost of operation, small size and weight
Easy installation and handling
Modern and elegant design
| Acoustic signal | 85 dB / 0,3 m |
| Certification | EN 50194-1:2009, EN50291-1:2010 |
| Test/Reset function | Ano |
| Instalace | na stěnu - pod strop nebo nad podlahu - dle typu detekovaného plynu (šrouby jsou součástí balení) |
| Power | ze sítě: AC 230 V / 50-60 Hz |
| Battery power supply | záložní: NiMH baterie 9V (volitelné - baterie není součástí) |
| Working temperature | 0 °C až +50 °C |
| Operating humidity | 10% - 95% |
| Dimensions | 112 x 73 x 42 mm |
| Signaling | akustický alarm 85 dB doprovázený hlasovým varováním „Prosím pozor, únik oxidu uhelnatého!" nebo „Prosím pozor, únik plynu!" a vizuální indikací červené LED signálky, údaj na displeji o zjištěné koncentraci |
| Storage conditions | teplota: -10 °C až 50 °C |
| Signs | CE |
Settings