Description
Polypropylene, a material characterized by chemical and mechanical resistance, was used for the production of the high sorption carpet. The carpet belongs to the PREMIUM product line. The carpet is a very effective means of capturing leaks that occur over a large area. It protects the floor under machines or in busy corridors, prevents slippery surfaces during leaks of dangerous liquids. The roll of carpet is supplied in dimensions 76 cm × 45 m.
Benefits
Protective textile layer with camouflage print protects the sorbent from abrasion damage and extends its service life. The pattern covers minor tears and thus extends its use from an aesthetic point of view.
Thickness of the textile sorbent
A thick sorbent is a fabric with a higher basis weight and thickness. As a result, it can soak up large quantities of leaked liquids. It is best used in operations with a risk of large or continuous spills of hazardous substances.
Textile sorbent design
Carpet is excellent for covering large areas, for example under machinery or in busy corridors. Suitable for everyday use.
Application
Textile universal sorbents are designed for the sorption of all non-aggressive liquids. They quickly and safely suck up emulsions, oils, fats, petroleum substances, solvents, water, aqueous solutions or weak chemical solutions. They are used in warehousing, manufacturing or repair facilities to prevent the release of hazardous substances or to deal with emergency situations in the event of a sudden release of these liquids.
The use of these sorbents will provide you with:
Perforation
Perforation allows you to tear off the necessary piece of fabric and better use the sorbent surface area. The transverse, longitudinal perforation of this MRCP 7645 sorbent makes it possible to adapt to the needs of a specific workplace, for example to cover rugged surfaces.
Notice
These sorbents cannot be used for extracting oil from the water surface, as they preferentially absorb water and aqueous solutions and therefore sink to the bottom.
Disposal
Disposal of used sorbents is governed by the properties of the absorbed liquids, by internal guidelines for handling chemicals and also by law - important laws are No. 185/2001 Coll. on waste or No. 350/2011 Coll. on chemicals and mixtures. We recommend that hazardous waste is handed over to a specialised company for the disposal of hazardous substances.
Sorbent ranges
PREMIUM series textile sorbents are made of special microfibre non-woven polypropylene fabric. Their surface is coated with a thin protective layer that protects the sorbent against abrasion and fiber release. The fabric is also reinforced by ultrasonic bonding, thus greatly increasing its strength. This allows workers to walk over the sorbents. Sorbents from this range are suitable for use in areas where higher mechanical resistance and absolutely minimal fibre release from the surface is required.
| Length | 45 m |
| Type of sorption | univerzální |
| Dimensions | 76 cm x 45 m |
| Sorption capacity | 175 l |
Settings