PIR detector Radal CSA-FSW - cable - combined
External wired, combined PIR motion and flame detector; 100% coverage and instant response; adjustable time interval between messages
| Code | CSA-FSW |
| Availability: | Currently unavailable |
| Producer: | CZ - S |
| Category: | Combined detectors |
Where is the detector suitable?
The CSA-FSW detector is suitable for less controlled areas such as public toilets, cubicles, changing rooms, discreet areas, employee areas or public buildings where violations of the prohibition on handling fire or smoking tobacco products may be more frequent.
What can the detector do?
It offers detection of illegal smoking in outdoor areas subject to rapid smoke and gas ventilation. It can trigger preset voice messages when motion is detected. Detects flame from a 25mm cigarette lighter at a distance of 6m within 1 second. It will alert the occupants by visual indication, voice message or other acoustic signal. Sensor sensitivity can be adjusted from up to five sensitivity modes.SmartWave© voice message playback software allows a choice of 100 voice messages, time interval, volume and number of replays.
How is the detector powered?
It is powered by an external CSA-006 power module or by 4 AA alkaline batteries. A Fault - Battery is Low" voice message warns of low power and imminent battery discharge.
Can the detector be connected to another device?
The device can be installed stand-alone or can be wired to other devices such as smoke and flame detectors, PIR motion detectors, optical voice detectors or control panels.
If you would like to order a system consisting of multiple devices, please contact us by phone or email.
Where to install the detector?
Suitable for installation in open spaces, building entrances and exits, rooms with high ceilings or areas that are exposed to occasional smoke or steam.
Can be installed on the ceiling or wall.
Accessories:
For more convenient operation of a single detector or an entire system of multiple RADAL Cig-Arrete detectors, the CSA-IR2 wireless remote control (not included) can be used.
*certification: CE, EQC
Advantages:
Unique SpeechPOD PIR motion detection technology
Up to five sensor sensitivity modes can be set
Option of deactivation mode
Ability to set the time interval between messages so that voice messages are played at the right time
Powered by an external CSA-006 power module or AA alkaline batteries
Acoustic alert for end of battery life
Can be controlled with the CSA-IR2 remote control (not included)
| Acoustic signal | prostřednictvím přednastavených hlasových zprávy |
| Certification | CE, EQC |
| Receiver sensitivity | Vysoká, středně vysoká, normální, středně nízká, nízká nebo vypnuto |
| Weight | 0,75 kg |
| Material | GRP plast vyztužená vlákna |
| Power | DC, 4 ks alkalické baterie 1,5 V typu AA (baterie nejsou součástí balení), pomocí AC adaptéru CSA-SMPSU, pomocí externího napájecího modulu CSA-006 nebo externího napájecího boxu CSA-EBB |
| Working temperature | -10°C - 50°C |
| Connecting detectors | Wired 8 - 28 V, Wired 6 V |
| Current draw | <250 mA |
| Operating humidity | 0 - 95% RH nekondenzující |
| Product dimension | 198 x 152 x 76 mm mm |
| End-of-life signalling | hlasová zpráva |
| Static current | <0,5 mA |
| Retrieved from | Kabelový |
| Mounting method | Na strop nebo stěnu (šrouby nejsou součástí balení) |