SAFE 10Y30-RF - FireSafe wirelessly connectable fire detector
The SAFE 10Y30-RF wireless smoke detector is a modern fire detector with dual-spectrum smoke detection and a dust-r
| Code | SAFE10Y30RF |
| Availability: | In stock |
| Producer: | CZ - S |
| Category: | Detectors and detectors |
| EAN: | 0703123018227 |
A new generation of wireless fire detector with ground-breaking dual-spectrum dust-resistant optical chamber detection and SIC technology to temporarily silence the alarm with an IR remote control, which can operate as part of a FireSafe fire alarm system supported by a Hub FireSafe central control unit or completely stand-alone. Power is provided by an integrated lithium battery (built-in, non-replaceable) guaranteeing extremely long operation of the device for more than 10 years and an extended 10-year warranty on both the battery and the device itself.
A new generation of wireless fire detector for continuous air monitoring for smoke with a breakthrough detection of a dual-spectrum dust-resistant optical chamber powered by an integrated lithium battery (built-in, non-removable) guaranteeing extremely long operation of the device for more than 10 years and an extended 10-year warranty.
SAFE 10Y30 - RF is a smoke detector in a timeless compact design combining the latest hardware and software technologies applied to a functional smart detector design representing a new level of standard in residential fire safety.
The detector includes an integrated RF module which, thanks to the CONNECTED function, allows two or more FireSafe detectors to be connected wirelessly to create an interconnected wireless network. In this case, if one of the devices triggers an alarm, it will send out a radio signal and all other FireSafe units connected in the network will respond to the alarm.
An intelligent Hub FireSafe central control unit can be added to the wireless network. These units then enable convenient setup and control of the complex FireSafe system remotely via an intuitive free mobile app (for Android and iOS) for smartphones, tablets and more. The Hub monitors the activity of all connected FireSafe detectors and devices, and immediately notifies system users via push notifications if a hazard is detected.
For residential fire detection systems, the priority is to inform occupants in a timely manner of an impending real danger. The AI SAFE microprocessor was developed based on a detailed analysis of the combustion properties of materials and works with a prediction algorithm that compares data from a dual-spectrum optical sensor and filters out the potential for false alarms in real time. If the recorded data corresponds to liquid water vapour particles or other types of fumes the detector will not respond. However, if the dynamics of the data pattern matches the actual smoke particulate parameters of the fire the detector will immediately trigger a fire alarm.
If the smoke concentration reaches a set value during detection, the detector automatically triggers a loud 85 dB audible alarm signal accompanied by the flashing of a red LED to indicate a fire alarm. This is a targeted way of attracting the attention of building occupants to the fact that a fire has started in a part of the building by means of a high noise level and an intense LED signal. The purpose of a fire alarm is to immediately respond to an alarm event or to move people from the scene of an emergency to a safe zone.
The detector has a combination button with TEST and SILENCE function, which is designed both for testing and verifying the correct functioning of the device and for temporary silencing of the detector. If you know the cause of the fire alarm activation and need to silence the loud siren sound, there is no need to go to the detector itself to silence it using the button. SIC technology allows you to remotely silence the audible alarm by pressing any button on a standard IR remote control (most controls for home appliances such as TVs).
The power supply is provided by an integrated 3 V lithium battery (built-in, non-replaceable) guaranteeing extremely long detector operation for more than 10 years. Battery operation allows for quick and easy installation and ensures proper operation of the smoke and fire detector for more than 10 years after activation. Activation of the power battery occurs after the detector is placed and secured in the mounting bracket. After 10 years of protection and with 30 days notice, the detector will notify you of the end of life and automatically alert you that it needs to be replaced. The extended 10-year warranty covers both the battery and the device itself.
SAFE 10Y30 - RF
User manual with set of information labels
Mounting bracket
Mounting material
| Acoustic signal | Optická - duální LED indikátor Akustická - 85 dB ve vzdálenosti 3 m |
| Certification | EN 14604:2005+AC: 2008 |
| Detection | kouř |
| Instalace | na stěnu, na strop |
| Power | 3V CR123A lithiová baterie (nevyměnitelná) |
| Working frequency | 868 MHz |
| Working temperature | -10 °C až +55 °C (+14 °F až 131 °F) |
| Operating humidity | Až 95 % relativní vlhkosti bez kondenzace |
| Dimensions | ø 81,5 mm × v 51,6 mm (ø 3.21“ × h 2.03“) mm |
| Storage conditions | Teplota: -20 °C až +60 °C Vlhkost: 5 % až 95 % relativní vlhkosti bez kondenzace |
| Sensor type | Fotoelektrický - dvouspektrální |
| Battery lifetime | 10 let |
| Mounting method | vnitrřní |
Settings