Product description
Polypropylene, which is characterized by chemical and mechanical resistance, was used for the production of the low sorption carpet. The carpet belongs to the MEDIUM product line. The carpet is a very effective means of capturing spills that occur over a larger area. It protects the floor under machines or in busy corridors and prevents slippery surfaces from forming when dangerous liquids leak. The roll of carpet is supplied in dimensions 40 cm × 50 m.
Benefits
Due to the large internal volume of the fabric and the large surface area of the microfibres, this sorbent has a high sorption capacity.
Thickness of the textile sorbent
Lightweight sorbent is a fabric with a lower basis weight and thickness. It is very well suited for use in spills or in operations with lower loads or lower risk of large spills of hazardous liquids.
Textile sorbent design
The carpet is excellent for covering large areas, for example under machinery or in busy corridors. Suitable for everyday use.
Application
Textile universal sorbents are designed for the sorption of all non-aggressive liquids. They quickly and safely suck up emulsions, oils, fats, petroleum substances, solvents, water, aqueous solutions or weak chemical solutions. They are used in warehousing, manufacturing or repair facilities to prevent the release of hazardous substances or to deal with emergency situations in the event of a sudden release of these liquids.
The use of these sorbents will provide you with:
Perforation
Perforation allows you to tear off the necessary piece of fabric and better use the sorbent surface area. With MRLM 4050, the transverse perforation allows the sorbent to adapt to the needs of a specific workplace, for example to cover rugged surfaces.
Packaging
The sorbents are supplied in a practical dispensing box to protect them from contamination and deterioration before use. It helps to preserve sorption capacity (with area under long-term loading, sorption capacity can be reduced by loss of free volume). This packaging makes the sorbent ready for immediate use.
Disposal of used sorbents
Disposal of used sorbents is governed by the properties of the absorbed liquids, by internal guidelines for handling chemicals and also by law - important laws are No. 185/2001 Coll. on waste or No. 350/2011 Coll. on chemicals and mixtures. We recommend that hazardous waste is handed over to a specialist company for the disposal of hazardous substances.
Notice
These sorbents cannot be used for extracting oil from the water surface, as they preferentially absorb water and aqueous solutions and therefore sink to the bottom.
Sorbent ranges
MEDIUM series textile sorbents are made of a special microfibrous polypropylene non-woven fabric, which is additionally reinforced by ultrasonic bonding. This significantly increases the strength and surface resistance of the sorbent. They are best used in operations where mechanical resistance and reduced fibre release from the surface is required. They allow for occasional crossing and movement of people.
Settings